Troubleshooting Hints - Gauges Cluster

TRY FOLLOWING CHECKS BEFORE DOING SYSTEM CHECK
1. Check I/P Fuse Block Fuses 1D, 3E, 9C, 1A and 5A by visual inspection.
2. Check Relay Center Fuse 8 by visual inspection.
3. If more than one indicator or gage is out, check common power and ground inputs.
4. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections. Refer to General Troubleshooting Procedure. Diagnostic Aids

^ Refer to System Check for a guide to normal operation.
^ Refer to System Diagnosis for diagnostic tests.