Troubleshooting Hints - Exterior Lights

TRY FOLLOWING CHECKS BEFORE DOING SYSTEM DIAGNOSIS
1. Check I/P Fuse Block Fuses 1B, 6B and 6C by visual inspection.
2. If one of the Turn Indicators goes on when the Park Lamps are turned on, check Front Park/Turn Lamp on that side.
3. If Turn Lamps stay on (do not flash) in both left turn and right turn, replace Turn Flasher.
4. If Hazard Lamps stay on (do not flash) in HAZARD, replace Hazard Flasher.
5. If a Turn Indicator does not light, but turn signals work, check bulb, connections, and wiring to indicator.
6. If only one light does not operate, check bulb, socket, and related wiring (see schematic).
7. If Stoplamps do not turn off, adjust or replace Cruise/Shift Interlock/Brake Switch as necessary.
8. Check that grounds G104, G105, G201, G202 and G402 are clean and tight.
9. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections. Refer to General Troubleshooting Procedure. Diagnostic Aids
^ Refer to System Check Table as a guide to normal operation.
^ Refer to System Diagnosis for diagnostic tests.