Service Procedure

1. EIGHTY EIGHT & NINETY EIGHT ONLY: Remove right lower instrument panel insulator (see Figure 1)





AURORA ONLY: Remove left lower instrument panel insulator (see Figure 2), remove two (2) 7 mm screws and one (1) lamp assembly.

2. Remove the two (2) electrical connectors to the MALL module.

3. Remove MALL module from multi-use bracket by pressing down on center tab of mounting bracket and sliding module downward until mounting rails disengage.

^ If MALL module is part number 10276237 (printed on white label on module), proceed to step 4 and install a new module, part number 10287337.

^ If MALL module is part number 10287337 (printed on lavender label on module), proceed to step 4 and reinstall removed module.

4. Install MALL module to multi-use bracket by aligning rails on module with mounting bracket rails and sliding module upward into place until locking tab engages.

5. Reinstall electrical connectors, bulbs and lower instrument panel insulator.

6. Install a Campaign Identification Label.