Outside Door Handle

Lock Mechanism & Outside Door Handle:

Lock Mechanism & Outside Door Handle:

Adjust
1. Apply slight downward pressure on the lock lever and upward pressure on lock rod.
2. While lever is held up, rotate the barrel nut until the end of the nut is aligned with the hole in the attaching clip.

Remove or Disconnect

Important
^ Window must be in a full up position.
1. Negative battery cable.
2. Door trim panel.
3. Water deflector.
4. Lock rods and linkage.
5. Discard lock rod clips.
6. Two bolts.
7. Handle.

Install or Connect

1. Handle.
2. Two bolts.
3. Lock rods then adjust barrel nut.
4. Water deflector.
5. Door trim panel.
6. Negative battery cable.