Inside Temperature Sensor

In Vehicle Temperature Sensor And Aspirator:

Remove or Disconnect

1. Wood grain panel.
^ Two screws in I/P compartment and pop out.
2. Knee bolster assembly.
3. Sensor Grille.
4. Sensor from knee bolster heater and A/C control.
^ Release retainer clips through grille hole.
5. Electrical connector.
6. Sensor from aspirator tube.

Install or Connect

1. Sensor to aspirator tube.
2. Electrical connector.
3. Sensor to knee bolster.
4. Sensor grille to knee bolster.
5. Knee bolster to I/P
6. Wood grain panel to I/P.