Operation CHARM: Car repair manuals for everyone.
Home >> Oldsmobile >> 1997 >> Silhouette V6-3.4L VIN E >> Repair and Diagnosis >> Powertrain Management >> Ignition System >> Camshaft Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Camshaft Position Sensor: Service and Repair






Notice: The Camshaft Position Sensor graphic illustrates the original factory installation. Do not route the new sensor pigtail as shown. Follow the Installation procedure below. Handle carefully to avoid damage to the sensor and pigtail. Route away from electronic components to avoid Electromagnetic Interference (EMI).


Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the serpentine drive belt.
3. Remove the power steering pump assembly.
4. Remove the electrical connector.
5. Remove the bolt.
6. Remove the sensor.


Installation Procedure
1. Install the Camshaft Position Sensor. Tighten the retaining bolt to 10 Nm (8 lb. ft.).
2. Connect the electrical Connector.
3. Install the power steering pump.
4. Install the serpentine drive belt.
5. Connect the negative battery cable.

pro multis · About Operation CHARM