Preset Scan

When you press the SCAN push-button and hold the button for at least 2 seconds, the Preset Scan mode is activated. Pressing and holding the SCAN button immediately mutes the audio. The receiver chooses the last preset selected by either the radio preset buttons or the SWC program button, if applicable. If the receiver is presently tuned to a preset that was selected with either one of these buttons, the receiver will increment to the next preset selection. The audio is then un-muted while the tuner pauses for 5 seconds before again muting and increments to the next preset. The associated ATC mode will also be selected along with the preset.