Hazard Warning Lamps

Battery positive voltage (B+) is supplied at all times from the IP fuse block BRK/HZRD LPS Fuse 6B via 140 (ORN), through the hazard flasher to the normally open switch in the turn/hazard switch. With the hazard switch in the ON position, battery positive voltage (B+) is applied through the turn/hazard switch to all four paths used by the LH and RH turn lamps. All turn lamps and both indicators flash on and off. With the hazard switch in the ON position, the turn circuit is always open, and the hazard flasher controls the lamps.