Service Procedure

IMPORTANT:
The engine could have a BOSCH manufactured fuel rail and fuel pressure regulator. This change could have happened when past service was performed on the vehicle. There should be a Manufacturer's label located on the backside of the fuel rail just below the fuel inlet connector. If the engine has a BOSCH Manufacturer's label, Dealers should claim 0.2 hours under labor operation V1117 - "Inspect engine fuel rail, no replacement required", plus the additional 0.1 hours Administrative Allowance, to close out the recall. If the fuel rail has a DELPHI Manufacturer's label, perform the repair as stated in this bulletin.

Inspect the engine fuel rail:

^ If the fuel rail has a DELPHI manufacturer's label, refer to the appropriate service manual and replace the engine fuel pressure regulator. Use labor operation V1082 to close the recall.

^ If the fuel rail has a BOSCH manufacturer's label, do not replace the fuel pressure regulator. Use labor operation V1117 to close the recall.