Power Door Lock Switch: Service and Repair

Removal Procedure

1. Disconnect the negative battery cable.
2. Remove the door lock switch bezel.
3. Use a small, flat-bladed tool in order to depress the plastic clips along the top edge of the switch plate.
4. Release the power door lock switch retainers.
5. Remove the power door lock switch.

Installation Procedure

1. Install the power door lock switch to the bezel.
2. Push downward on the switch to secure.
3. Connect the electrical connectors.
4. Ensure the groove on the back of the manual lock lever engages the lock rod.
5. Install the door lock switch bezel.
6. Connect the negative battery cable.