Theft Deterrent RE-Learn Using T-50 or T-60

1. Enter the T-50 or T-60 Service Programming System (SPS).

2. Select TERMINAL TO VEHICLE PROGRAMMING.

3. Select DONE and follow the instructions on the VEHICLE SETUP screen.

4. Select THEFT MODULE RE-LEARN.

5. Follow the instructions on the remaining screens:

^ The PCM and BCM will be prepared for re-learn.

^ A security timer will be on for approximately 10 minutes. During the 10 minute wait period, the T-50 or T-60 terminal must remain connected to the vehicle.

^ When the PCM and BCM are prepared to re-learn, turn the ignition switch off, then to the start position. The engine should now start.