Antenna, Radio: Service and Repair

REMOVAL PROCEDURE
The fixed antenna is designed to withstand most car washes without damage. The fixed antenna cannot be adjusted up or down. If the mast becomes slightly bent, straighten the mast by hand. The antenna requires replacement if severely bent.
1. Pull back the carpet in the rear compartment to expose the antenna base (3).
2. Remove the antenna mounting spacer (1) from the base (3).
3. Remove the mounting screws from the base (3).
4. Disconnect the antenna lead (2) from the base (3).

INSTALLATION PROCEDURE
1. Connect the antenna lead (2) to the base (3).

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the base (3) mounting screws.

Tighten
Tighten the screws to 6 N.m (53 lb in).

3. Connect the mounting spacer (1) to the base (3).
4. Reposition the rear compartment carpet.