Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Door: Service and Repair

REMOVAL PROCEDURE




1. Remove the Instrument Panel.
2. Disconnect the vacuum connector.
3. Remove the body harness connector (C203) support bracket mounting nuts.
4. Remove the bracket from the lower 2 air inlet assembly mounting studs.




5. Remove the air inlet assembly mounting studs (3).
6. Remove the air inlet assembly (2).
7. Remove the air inlet assembly gasket (1), if necessary.

INSTALLATION PROCEDURE




1. Install the air inlet assembly gasket (1), it necessary.
2. Install the air inlet assembly (2).

NOTE: Refer to Fastener Notice in Service Precautions.

3. Install the air inlet assembly mounting studs (3).

Tighten
Tighten the studs to 4.5 N.m (40 lb in).




4. Install the body harness connector (C203) support bracket to the lower 2 air inlet assembly mounting studs.
5. Install the bracket mounting nuts.

Tighten
Tighten the nuts to 9.0 N.m (80 lb in).

6. Install the vacuum connector.
7. Install the instrument panel.