95. Camshaft Cover Installation - Left

Notice: Refer to Fastener Notice in Service Precautions.





1. Install new spark plugs.
Tighten the spark plugs to 20 Nm (15 ft. lbs.).





2. Remove the J42038 from the rear of the cylinder head.
3. Wipe the cylinder head sealing surface with a clean, lint-free cloth.





4. Place the camshaft cover in position on the cylinder head.
5. Install the camshaft cover bolts.
Tighten the camshaft cover bolts to 9 Nm (80 inch lbs.).