Fuel Tank Pressure Sensor: Service and Repair

REMOVAL PROCEDURE




1. Turn OFF the ignition.
2. Remove the trunk liner.
3. Remove the nuts retaining the fuel sender access panel.
4. Remove the fuel sender access panel.




5. Remove the fuel tank pressure sensor electrical connector.
6. Use a twisting motion to remove the fuel tank pressure sensor (7) from the modular fuel sender assembly.

INSTALLATION PROCEDURE




1. Install the new fuel tank pressure sensor (7) to the modular fuel sender.
2. Install the fuel tank pressure sensor electrical connector.




3. Install the fuel sender access panel.

NOTE: Refer to Fastener Notice in Service Precautions.

4. Install the nuts retaining the fuel sender access panel.

Tighten
Tighten the nuts to 10 N.m (88 lb in)

5. Install the trunk liner.