Fog Lamp Replacement - Front

REMOVAL PROCEDURE

CAUTION: Refer to Halogen Bulb Caution in Service Precautions.




1. Partially remove the front edge of the front fender liner in order to gain access to the fog lamps.




2. Remove the bulb/socket from the fog lamp by rotating counterclockwise.
3. Disconnect the electrical connector from the bulb/socket, if required.




4. Remove the bolts (1) from the fog lamp.
5. Remove the fog lamp from the front bumper impact bar.

INSTALLATION PROCEDURE




1. Connect the electrical connector to the bulb/socket, if required.
2. Install the bulb/socket to the fog lamp.
3. Rotate the bulb/socket clockwise to secure it to the fog lamp.




4. Position the fog lamp to the front bumper impact bar.

NOTE: Refer to Fastener Notice in Service Precautions.

5. Install the fog lamp bolts (1) to the fog lamp.

Tighten
Tighten the fog lamp bolts to 3 N.m (27 lb in).

6. Check and adjust the fog lamp aim, if necessary. Refer to Fog Lamp Aiming Procedure.




7. Install the front edge of the front fender liner.