Power Window Switch Replacement - Rear Door

REMOVAL PROCEDURE




1. Remove the lower switch bezel trim screws.
2. Pull down to remove the lower switch bezel trim panel.
3. Using a small flat-bladed tool, at the rear of the switch, push in and lift up to release the rear clip.




4. Remove the rear door power window switch bezel from the rear door trim panel.
5. Disconnect the electrical connector from the rear door power window switch.
6. Release the rear door power window switch retainers.
7. Remove the rear door power window switch from the bezel.

INSTALLATION PROCEDURE




1. Install the rear door power window switch to the rear door power window switch bezel, pressing into place until fully seated
2. Connect the electrical connector to the rear door power window switch.




3. Install the rear door power window switch bezel (1) to the rear door trim panel. Ensure that the retainers are locked into place.