Cylinder Head Specifications

Tighten the M11 cylinder head bolts a first pass in sequence to 40 Nm (30 ft. lbs.).

Tighten the M11 cylinder head bolts a second pass in sequence an additional 100 degrees using the J 36660-A.

Tighten the M11 cylinder head bolts a final pass in sequence an additional 100 degrees (200 degrees total) using the J 36660-A.






Tighten the long M6 cylinder head bolt to 12 Nm (106 inch lbs.).

Tighten the two shorter M6 cylinder head bolts to 12 Nm (106 inch lbs.).