Seat Cushion Cover Replacement - Rear (AT5 - 60/40 Split Bench)

Seat Cushion Cover Replacement - Rear (AT5 - 60/40 Split Bench)

Removal Procedure

1. Remove the second row 60/40 split bench seat. Refer to Seat Replacement - Rear () .
2. Remove the finish covers. Refer to Seat Trim Replacement - Side (Seat Trim Replacement - Side) .
3. Remove the seat riser. Refer to Seat Riser Replacement - Rear () .
4. Remove the rear seat adjuster. Refer to Seat Adjuster Replacement - Rear () .




5. Remove the recliner bolts.




6. Separate the rear seat cushion from the rear seat back.




7. Remove the J retainers (1) that secure the seat cushion cover from the seat frame.




8. Remove the rear seat cushion cover retainer rings (2).
9. Separate the rear seat cushion cover (1) away from the foam pad (3) while separating the hook and loop retainers.
10. Remove the rear seat cushion cover (1) from the foam pad.



Installation Procedure

1. Install the rear seat cushion cover (1) to the foam pad.




2. Secure the rear seat cushion cover (1) to the foam pad (3) using retainer rings (2) and the hook and loop retainers.




3. Install the J retainers (1) to secure the seat cushion cover to the seat frame.




4. Install the rear seat cushion to the rear seat back.

Notice: Refer to Fastener Notice in Cautions and Notices.

5. Install the recliner bolts.

Tighten the bolts to 32N.m (24 lb ft).

6. Install the rear seat adjuster. Refer to Seat Adjuster Replacement - Rear () .
7. Install the seat riser. Refer to Seat Riser Replacement - Rear () .
8. Install the finish covers. Refer to Seat Trim Replacement - Side (Seat Trim Replacement - Side) .
9. Install the second row 60/40 split bench seat. Refer to Seat Replacement - Rear () .