Control Arm

Front Lower Control Arm Nuts (at Frame) * 83 ft. lbs.
Rear Control Arm Nut * 162 ft. lbs.
Ball Stud Castle Nut (Lower Control Arm-Front) 40 ft. lbs.

* This is a prevailing torque type fastener. This fastener may be reused ONLY if:
- The fastener and its counterpart are clean and free from rust.
- The fastener develops a specified amount of torque (drag) against its counterpart prior to the fastener seating Refer to the appropriate service procedure for the prevailing torque value. If the fastener does not meet these criteria. REPLACE the fastener.