12. Control Valve Body and Spacer Plate Disassemble

Control Valve Body and Spacer Plate Disassemble





1. Remove the indicated control valve body bolts (374-381, 384).





2. Carefully lift the fluid pressure manual valve position switch assembly (395) off of the control valve body (300). Handle the switch assembly carefully, it is very delicate.





3. Remove the control valve body assembly (300).
4. Remove the 2 retainers (368) from the valve body assembly.
5. Remove the spacer plate assembly (370) with the 2 screen/seal assemblies (382) and the gaskets (369, 371) from the valve body (300).
^ Remove the 6 ball check valves (372, 373) from the valve body (300).
^ Remove the case cover pin (410).





6. Remove the 4 ball check valves (372) from the case cover (400).