Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
107. Ignition Coil Module Installation - Right
Ignition Module Installation - Right
1. Ensure the RFI/ground spring (1) and the seal (2) are in place and inspect each for serviceability.
2. Install the right spark plug boots onto the ignition coil assembly.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the right spark plugs.
^ Tighten the spark plugs to 15 Nm (11 ft. lbs.).
4. Position the ignition coil assembly on the right camshaft cover.
Important: DO NOT damage the ignition coil perimeter seal.
5. Install the ignition coil assembly bolts in sequence.
^ Tighten the ignition coil assembly bolts to 9 Nm (80 inch lbs.).