Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Connecting Rod, Engine
| Connecting Rod Bolt | First Pass | 22 ft. lbs. |
| Second Pass | Back off to zero | |
| Third Pass | 18 ft. lbs. | |
| Final Pass | +110° | |
| Connecting Rods | Diameter, Crankshaft End, Without Bearings | 2.2495-2.2501 inch |
| Taper, Maximum | 0.0002 inch | |
| Piston Pin End, With Bushing | 0.8268-0.8274 inch | |
| Taper Maximum | 0.0003 inch | |
| Without Bushing | 0.9234-0.9421 inch | |
| Width | 0 8572 inch | |
| Center to Center | 5.9449 inch | |
| Side Clearance, Pair of Connecting Rods on Crankpin | 0.0079-0.0197 inch |