Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
36. Reverse Clutch Housing Installation
- Tools Required- J 34741-3 Input Shaft Seal Sizer
1. Remove the J 34741-3.
2. Install the reverse clutch housing and the second sprag assembly (500-520) into the case. The teeth on the reverse clutch housing must seat into the reaction sun shell. Twist the reverse housing to install and insure proper seating.
3. Install the thrust washer (436) on top of the reverse clutch housing with the tabs pointing down.