Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
4. Fourth Servo Removal
1. Remove the three 10-mm bolts (534) from the servo cover.
IMPORTANT: Hold the servo cover in place until all of the bolts are removed. If this is not done, the apply pin will damage the bore.
2. Remove the following parts:
- The servo cover (524)
- The servo assembly (529)
- The spring (533)