Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
73. OSS Sensor and Cooler Fitting Installation
1. Inspect the output speed sensor (130) for damage or a cut seal (4).
2. Inspect the cooler connector (3) for damaged threads, clogging, or a cut seal (4).
3. Install the output speed sensor (130) and the seal (4) into the case extension.
4. Install the output speed sensor bolt (131).
- Tighten the bolt to 8-14 Nm (6-10 ft. lbs.).
5. Install the cooler fitting (3) and the new seal (4) into the case.
- Tighten the cooler fitting to 25-29 Nm (19-21 ft. lbs.).