Lock Replacement - Sliding Door Rear

Lock Replacement - Sliding Door Rear

Removal Procedure

1. Remove the sliding door inner trim panel. Refer to Trim Panel Replacement - Side Rear Door (Trim Panel Replacement - Side Rear Door) .
2. Remove the sliding door water deflector. Refer to Water Deflector Replacement - Sliding Door (Water Deflector Replacement - Sliding Door) .
3. Remove the sliding door latch screws.
4. When the sliding door rear lock is loose, unhook the lock rod from the sliding door rear lock.




5. Remove the sliding door rear lock from the sliding door.



Installation Procedure

1. Install the sliding door rear lock to the sliding door.
2. Hook the lock rod to the sliding door rear lock.





Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the sliding door rear lock screws according to the specified fastener tightening sequence.

Tighten the screws to 10 N.m (89 lb in).

4. Install the sliding door water deflector. Refer to Water Deflector Replacement - Sliding Door (Water Deflector Replacement - Sliding Door) .
5. Install the sliding door inner trim panel. Refer to Trim Panel Replacement - Side Rear Door (Trim Panel Replacement - Side Rear Door) .