Seat Adjuster Mechanism Replacement - Manual (Two-Way Manual)

Seat Adjuster Mechanism Replacement - Manual (Two-Way Manual)

Removal Procedure





1. Remove the seat adjuster bolts.
2. Remove the front seat anchor nuts.
3. Remove the seat adjuster (1) from the seat frame.



Installation Procedure






Important: When installing manual seat adjusters to the seat bottom frame, the right and the left seat adjuster sliding mechanisms should be parallel and in phase with each other. After installing the manual seat adjusters to the seat frame, inspect the operation of the adjusters.


1. Install the seat adjuster (1) to the seat frame.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the seat adjuster bolts.

Tighten the bolts to 32 N.m (24 lb ft).

3. Install the front seat anchor nuts.

Tighten the nuts to 40 N.m (30 lb ft).