Starts, But Stalls

Engine starts but stalls when load is placed on the engine (A/C clutch engaged or transmission shifted into drive or reverse).

POSSIBLE CAUSE ACTION


EGR malfunction 1. Check EGR system in "Testing
flange gasket leaking, Procedures" in Emissions, if OK, step 2
solenoid valve malfunctioning, 2. Check EGR electronic controls in
valve sticking "Fuel Injection & Computerized Engine Controls"





Hot air tube not connected Check inlet air temperature system (HIAS)
to air cleaner - air damper in "Testing Procedures" in Emissions
door binding or not opening



Ignition timing Check Ignition Timing in "Adjustment
Procedures" in Emissions



Idle speed too low 1. Check and adjust idle speed in
"Adjustment Procedures" in Emissions
2. Check operation of any idle speed
control devices



Poor or contaminated fuel Recommend higher grade fuel