Type 3 - Varga

1. Assemble park brake lever and wave washer to trailing shoe, then install retainer and close ends.
2. Install park brake cable in lever of trailing shoe, then attach trailing shoe and leading shoe lower springs to shoes and anchor plate.
3. Position shoes on support plate and install hold down springs.
4. Install automatic adjusters, ends must be above extruded pins in web of shoe. Left side adjuster has left hand threads and right hand adjuster has right hand threads, do not interchange.
5. Install upper shoe to shoe spring, then rotate adjuster to to remove free play from adjuster assembly.
6. Install adjuster lever on leading pivot pin and attach short end of adjuster spring in hole of lever and long end in leading shoe hole.
7. Connect park brake cable and adjust shoes so that they do not interfere with drum installation.