Operation CHARM: Car repair manuals for everyone.
Home >> Plymouth >> 1997 >> Prowler V6-3.5L VIN F >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Bag Control Module: Service and Repair

WARNING:
- The ACM contains a safing sensor which enables the system to deploy the airbags. To avoid accidental deployment never connect ACM electrically to the system while vehicle battery is connected.

- Disconnect and isolate the battery negative (ground) cable before beginning any airbag system component removal or installation procedure. This will disable the airbag system. Failure to disconnect battery could result in accidental airbag deployment and possible personal injury. Allow system capacitor to discharge for 2 minutes before removing any airbag components.

REMOVAL
1. Disconnect and isolate the battery negative cable.
2. Fold the carpet down around the forward tunnel/floor pan to gain access to the ACM.






3. Remove the four attaching nuts.
4. Remove ACM from the passenger side of the vehicle. If wiring harness is to short to allow remove of the module, remove the radio and disconnect the wire harness fastener to free harness.
5. Disconnect ACM wire connectors.

INSTALLATION
For installation, reverse the above procedure.
- Position ACM (arrow pointing forward) in the console floor bracket, attach the nuts and tighten to 11 to 14 Nm (105 to 125 in. lbs.) torque.

pro multis · About Operation CHARM