Piston, Engine

DISASSEMBLING AND ASSEMBLING PISTONS AND CYLINDERS





1 Cylinder 6 Mark installed position
2 Cylinder base 6 Replace
gasket, 0.25 mm
3 Circlip 6 Pry out Check for correct fit
4 Piston pin 6 Must always remain with matched piston and may not even be used on different piston in same engine. Mark pistons and pins if necessary, when disassembling and assembling engine.
5 Piston 6
6 Circlip 6 Pry out - Check for correct fit
7 Piston ring 6
Groove 1
8 Piston ring 6
Groove 2
9 Piston ring 6
Groove3
10 Rubber lined spring 6
Groove3