Steering Column Lock: Service and Repair

Installation instructions

Disassembling

1. Disconnect the battery.






2. Loosen the blower and swing to one side.
3. Remove the steering wheel.
4. Remove the horn contact and trim panels.






5. Remove the combination switch.
6. Bore out the breakaway screws for the ignition steering lock.






7. Undo the fastening nut and set screw and remove the ignition steering lock.

Assembling

1. Install steering ignition lock.
2. Then break off the breakaway screws of ignition steering lock.
3. Install the combination switch and mount trim panels with horn contact.
4. Mount the steering wheel.
5. Install the blower and reconnect the battery.
6. Check all components for correct function.