Sunroof / Moonroof Gear Assembly: Service and Repair

Removing and Installing Gear in Element Guide

Removing

1. Remove electric drive and installation kit. Service and Repair




2. Unscrew mounting screws of element plate.




3. Take off element plate and remove element from the element housing.




4. Press gear out of the element housing from behind.


Installing

Note: Check the slip clutch of the electric drive prior to installation of the gear. Service and Repair




1. Inspect gear, replacing if necessary. Lubricate and insert gear in guide and raising cable in such a manner, that the element bears on the element guide without tension and without play. Use special grease.




2. Make sure that plastic pipe bears in its guide prior to installation of the element plate. Bolt element plate on the element housing.

Note: Special grease: TL-VW 745 universal cold grease.