Manual Transmission/Transaxle: Tools and Equipment
Tools for Disassembly/Assembly of Transmission
1 Bracket -- 9253
Order # 000.721.925.30
2 Assembling Sleeve -- 9255
Order # 000.721.925.50
3 Puller Set -- 9251
Order # 000.721.925.10
4 Puller -- use arms of puller 9284
5 Drift -- 9256
Order # 000.721.925.60
Tools for Disassembly/Assembly of Front Cover
1 Punch -- VW781
2 Pipe Section -- VW423
3 Drift -- 9254
Order # 000.721.925.40
4 Drift -- 9298
Order # 000.721.929.80
5 Internal Puller -- Standard (e.g. Kukko 21/4)
6 Internal Puller -- Standard (e.g. Schrem 14-20)
Tools for Disassembly/Assembly of Gear Housing
1 Mandrel -- P254
Order # 000.721.254.00
2 Thrust Piece -- P254a
Order # 000.721.254.10
2 Thrust Piece -- P254b
Order # 000.721.254.20
4 Drift -- 9254
Order # 000.721.925.40
Tools for Disassembly/Assembly of Transmission Case
1 Mandrel -- P254
Order # 000.721.254.00
2 Thrust Piece -- P254b
Order # 000.721.254.20
3 Drift -- 9254
Order # 000.721.925.40
4 Thrust Piece -- 9252
Order # 000.721.925.20
5 Drift -- 9515
Order # 000.721.951.50
Tools for Disassembly/Assembly of Input Shaft
1 Retainer Plate -- 9177
Order # 000.721.917.70
2 Socket -- 9105
Order # 000.721.910.50
Tools for Disassembly/Assembly of Drive Pinion
1 Drift -- VW519
2 Separating Tool -- Commercially available (e. g. Kukko 15-17)
Tool for Removing and Installing Differential
Thrust Piece -- 9252
Order # 000.721.925.50
1 Pressure Piece -- P263
2 Puller -- Commercially available
3 Pressure Piece -- P264b
Tools for Adjusting Drive Set (Ring and Pinion)
1 Measuring Mandrel -- VW385/1
2 Centering Discs -- 9109
Order # 000.721.910.90
3 Master Gauge --VW385/30
4 Dial Gauge -- Standard
5 Dial Gauge 0-3 mm -- Standard
6 Gauge Plunger -- VW385/14
7 Dial Gauge Extension 30 mm -- VW385/56
8 Gauge Block Plate -- 9281
Order # 000.721.928.10
9 Dial Gauge Bracket -- VW387
10 Clamping Sleeve -- 9145
Order # 000.721.914.50
11 Adjusting Device -- VW521/4
12 Measuring Lever -- VW388
13 Gauge Plunger -- VW388
Order # 000.721.919.60
14 Dial Gauge Extension 6.0 mm --VW382/10
15 Dial Gauge Extension 9.3 mm -- VW385/15
16 Clamping Device -- 9260
Order # 000.721.926.00
17 Sleeve -- 9263
Order # 000.721.926.30
18 Holder -- 9253
Order # 000.721.925.30