Sunroof / Moonroof: Adjustments

Adjusting lifting sun roof










1. Insert lifting sun roof and, if necessary, adjust on front and rear adjusting bolts until lifting sun roof runs level with the roof




2. If necessary, adjust the adjusting screws of the element guides so that the elements travel into the gates with large-scale tension.







3. If the elements are not in zero position, deviations must be equalized by adjusting microswitches on the electric drive.




4. The gates bolted on the lifting roof have slots with which the lifting roof and car roof panel can be adjusted to be in the same plane. Check gate guides, replacing if worn or damaged.




5. To increase stability of shape, lifting sun roof has been reinforced on the inside by adhered aluminium profiles. The pull anchors have been dropped.

6. Should the lifting roof protrude at the front, the centering wedges must be unscrewed on the roof beam and installed again with washers underneath.