Cleaning the Main Oil Duct In the Crankcase

Cleaning the main oil duct In the crankcase

Note: Both sealing caps must be removed from the crankcase for this procedure.

Removing

1. Drill a hole in the sealing cap

2. Drive out the sealing cap with a suitable punch.





3. Clean and/or flush the main oil duct


Installing

1. Apply film of Loctite 262 to the sealing surface of the cap.

2. Drive into a place with a plunger, e.g. VW 295.

Note: The sealing cap must lie approx. 2 - 3 mm below the edge of the housing.