Dashboard / Instrument Panel: Service and Repair

Removing

1. Remove instrument cluster and switch plates.

2. Remove sun visors, trim panel on front roof beam and trim panels on A pillars.

3. Unclip glove box light and disconnect plugs.





4. Unscrew glove box mounting screws. Pull off vent hose and take out glove box.





5. Unscrew mounting screws on hinge pillars.





6. Unscrew mounting screws on A pillars.





7. Unscrew mounting screws on bracket.





8. Pull air guides out of nozzles and take off instrument panel.

Installing

Fig. I:

Fig. II:

Installation is in reverse sequence. Make sure spring clamp engages in bracket.