Removing and Installing Control Unit of RS Vehilces [993]

Removing and installing control unit of RS vehicles [993]

Removal
Loosen flanged nut using a cross cut chisel.

Installation




Tighten new M5 flanged bolt with stop teeth (part no. 999 607 472 02) using circlip pliers, e.g. Hazet 4843a-12.

NOTE: Tighten the control unit carefully. The plastic mounting lugs can break off. The serial number must not be left on the control unit after installation. The two stickers must be handled confidentially together with the customer. One sticker must be attached to the invoice and the second sticker given to the customer.