Connecting System Tester 9288

CONNECTION





CAUTION:
- The vehicle must not be in gear (automatic transmission set to N or P) - risk of accidents!
- Work on the vehicle only with the ignition switched off.

After connecting the tester, the instructions indicated under the Test item are displayed on the System Tester 9288.

Charging via battery charger
- Connect the System Tester 9288 to the charger.

Diagnosis
- Connect the System Tester 9288 via the adapter line 9288/1 to the diagnostic connector of the vehicle.
- Switch on tester and operate according to the instructions displayed.