Tightening Specifications

Tightening Specifications
Oil Drain And Oil Filler Plugs 30 Nm (22 ft lb)
8 mm Hexagon Head Nuts At:
Front And Side Transmission Cover,
gear And Transmission Housings And
tensioning Plate 23 Nm Nm (17 ft lb ft lb)
Clamping Plate To Front Transmission Cover 10 Nm (7 ft lb)
22 x 1.5 mm Hexagon Head Nut To Input Shaft 200 Nm (147 ft lb)
30 x 1.5 mm Hexagon Head Nut To Input Shaft 250 Nm (184 ft lb)
30 x 1.25 mm Hexagon Head Nut To Output Shaft 300 Nm (220 ft lb)
8 mm Hexagon Head Nut To Shift Fork 23 Nm (17 ft lb)
Reverse Light Switch To Gear Housing 35 Nm (26 ft lb)
Guide Tube To Transmission Housing 10 Nm (7 ft lb)
Selector Gate To Tensioning Plate 10 Nm (7 ft lb)
8 mm Collar Nut To Return Gear II 35 Nm (26 ft lb)
Vent to transmission housing 35 Nm (26 ft lb)
Hexagon Head Bolt To Joint Flange 44 Nm (32 ft lb)
Oil Pan To Tension Plate (Microencapsulated) 6 Nm (4 ft lb)
Ring Gear To Differential Housing:
Hexagon Head Bolt With Ribbed Seating Surface 200 Nm (147 ft lb)

Front Axle Final Drive
Oil Filler Plug 22 Nm (16 ft lb)
Oil Drain Plug 30 Nm (22 ft lb)

Final Drive Mount At Rear Axle
Crossmember To Body 46 Nm (34 ft lb)
Mount To Crossmember (Lock Nut) 46 Nm (34 ft lb)
Mount To Transmission (Lock Nut) 46 Nm (34 ft lb)

Final Drive Mount At Front Axle
Front Axle Final Drive:
Mount To Front Axle Crossmember 23 Nm (17 ft lb)
Mount To Central Tube 85 Nm (63 ft lb)


Central Tube
Double Clamp To Central Shaft 35 to 40 Nm (26 to 29 ft lb)
Manual Transmission To Central Tube 85 Nm (63 ft lb)
Front Axle Final Drive To Central Tube 46 Nm (34 ft lb)