Opening / Closing Sequence

OPENING SEQUENCE

- Left and right roof microswitches signal "top closed" to control unit.
- Control disks in locking motors signal "position locked".
- Rocker switch initiates command "open top,,
- Indicator tamp is on.
- The locking motors unlock, control disks signal "end position reached". Locking motors cut out.
- Left and right roof microswitches switch on drive motors via the control unit.
- Limit switch on gear system reports "top fully open" and cuts out drive motors through the control unit.
- Indicator lamp goes out.


CLOSING SEQUENCE

- Limit switch on gear system reports "roof open" to control unit.
- Control disks in locking motors signal "position unlocked".
- Rocker switch initiates command to close.
- Indicator lamp is on.
- The drive motors are switched on by the control unit.
- Left and right roof microswitches report "top positioned on windshield frame". Drive motors cut out via control unit.
- Locking motors switched on.
- Control disks in locking motors signal "end position reached". Locking motors cut out.
- Indicator lamp goes out.