Fault Code 7

FAULT CODE 7
Calibration Not Carried Out Yet

This fault is stored in the following case:
1. A newly installed control module has not be calibrated yet

Fault Effect: No automatic adjustment possible

Elimination:

- Select menu item Calibration.

- Follow instructions on the screen and carry out the calibration

Note:
Calibration is not possible if the sensor voltage lies outside the plausible range (sensor voltage less than 2 volts or greater than 3 volts).

- Check the sensor voltages in menu item Actual values, with the vehicle parked on a level surface (vehicle not raised)

- Check sensor holder and linkage