DME 7.8

P1340

322 Position Of Camshaft In Relation To Crankshaft, Bank 1 - Below Limit

Diagnosis conditions
- Idle speed
- Reference mark recognized
- Engine speed between 600 rpm and 1.200 rpm.
- Engine temperature greater than 40 °C
- No fault in camshaft position sensors
- Reference mark OK
- No fault in camshaft adjustment
- No fault in engine temperature
- No fault in camshaft adjustment output stage

Possible fault cause
- Allocation of camshaft to inlet camshaft incorrect

Diagnosis/Troubleshooting

NOTE: This fault is stored if the engine was disassembled and the allocation of the camshaft to the inlet camshaft was incorrectly set







322 Position of Camshaft in Relation to Crankshaft, Bank 1 - Above Limit

Diagnosis conditions
- Idle speed
- Reference mark recognized
- Engine speed between 600 rpm and 1.200 rpm.
- Engine temperature greater than 40 °C
- No fault in camshaft position sensors
- Reference mark OK
- No fault in camshaft adjustment
- No fault in engine temperature
- No fault in camshaft adjustment output stage

Possible fault cause
- Solenoid hydraulic valve camshaft adjustment faulty
- Allocation of camshaft to inlet camshaft incorrect

Diagnosis/Troubleshooting

Part 1:

Figure 1:







Figure 2:

Part 2: