Test Point 6

Test point 6
Buckle, passenger

Fault codes 47, 48, 49,51

NOTE:
Only on USA vehicles:
1. Disconnect the plug connection X17.
2. Connect ohmmeter on the pin side on pins B7 and B8.
Display: approx. 400 Ohms

NOTE: The belt tongue must not be inserted in the buckle.

3. Connect ohmmeter on the pin side on pin B7 and ground.
Display: Infinity Ohm

4. Connect ohmmeter on the pin side on pins B7 and B8.
Insert the belt tongue in the buckle.
Display: approx. 100 Ohms

5. Inspect the wiring harness to the triggering unit for pinches and chafing damage.