Tools/Connecting Porsche System Tester 2

Tools

1. Porsche System Jester 2 with integrated digital multimeter.







2. When performing measurements on the control module connector with a multimeter, use measuring leads (e.g. commercially available leads from Messrs. Bosch or shop-made leads) in order to avoid damaging the contacts in the control module connector.

Normal pins:
1 to 2 measuring leads with 2,5 mm flat connectors.

Mini pins:
1 to 2 measuring leads with 1.6 mm flat connectors.

Connecting Porsche System Tester 2
The diagnostic socket (arrow) to which the Porsche System Tester 2 is connected is located in the driver's footwell (left-hand drive vehicles) or passenger's footwell (right-hand drive vehicles) near the fuse box.