Crankshaft: Specifications
| Bolt For Bearing Housing M9x129 | ||
| Initial Tightening | 25 Newton Meter (Nm) | |
| Final Tightening | 1 x 90 degrees | |
| Bolt For Crankcase Halves M6 | ||
| Tighten | 13 Newton Meter (Nm) | |
| Bolts, Crankcase/Bearing Housing M9 x 95/160 | ||
| Tighten | 22 Newton Meter (Nm) | |
| Crankshaft Endplay | ||
| New Installation | 0.05-0.24 Millimeter (mm) | |
| Wear Limit | 0.28 Millimeter (mm) |