Wheel Stud / Lug Nut

TIGHTENING SPECIFICATIONS
Wheel Bolts 130 Nm (96 ft. lbs.)

NOTE:
^ Screw in wheel bolts by hand and then tighten evenly.
^ Start at the top when tightening.


NOTE:





^ Apply a thin coating of Optimoly TA, or equivalent, aluminium paste to the thread, shank and below the head of the wheel bolts (between bolt head bearing surface and spherical cap ring).
^ Do not coat the spherical cap bearing surface facing the wheel.
^ If heavily contaminated, clean screws first with a lint-free cloth.