Fault Code 5506

Fault Code 5506

Electrical system (rate-of-turn sensor)

Diagnostic conditions
- Ignition on
- The fault is stored in the event of a fault in the electrical system of the rate-of-turn sensor or in case of a voltage drop.

Possible cause of fault
- Wiring faulty
- Voltage drop/weak battery
- Rate-of-turn sensor faulty

Affected terminals
Terminals 9, 10, 21, 39 and 41

Diagnosis/troubleshooting

NOTE:
- If the rate-of-turn sensor with part No. 996.606.117.00 is determined to be faulty, install the new rate-of-turn sensor with part No. 996.606.145.00. The front centre console holder and the lower front centre console support must be replaced for this purpose.
- Erase the fault memory before the troubleshooting and perform a test drive.

Work Instruction 1 - 6:

Work Instruction 7 - 8: