Coding

Coding

Four functions are available for selection under the 'Coding' menu item:
- Country coding
- Version coding
- Vehicle re-locking
- Alarm siren/tilt sensor

Country coding

The country in which the vehicle is used as well as the vehicle design (sliding roof, Cabrio) can be coded using the Porsche System Tester II No. 9588.

The type of alarm output and its duration depend on the country codes.

Allocation of country coding

Part 1:

Part 2:

Part 3:

Part 4:

Part 5:

Part 6:

Part 7:

Part 8:

(R) R = Right-hand drive.
L = Left-hand drive.


Version coding
Four versions can be selected under the 'Version coding' menu item.

Version 1
The doors are automatically locked as soon as the ignition is switched on.

1) Coded "D" at the factory. The control module is coded "GB" or "B" only at the place of use.

Version 2
The doors are automatically locked if the vehicle exceeds a limit speed of 5 km/h.

Version 3
The doors are automatically locked as soon as the ignition is switched on. If the doors are opened while the engine is running, automatic re-locking takes place if the vehicle exceeds a limit speed of 5 km/h.

Version 4
The doors are not locked automatically.

NOTE:
Automatically locked doors can be opened by pressing the central locking button (central locking switch) or by pulling on the door handle twice.